Bosch AE20 Installation Manual

Reading Bosch Security Systems, Inc. Product Date CodesFor Product Date Code information, refer to the Bosch Security Systems, Inc. Web site at: http://www.boschsecurity.com/datecodes/.en Installation GuideUniversal EnclosureAE20© 2018 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450Bosch Sicherheitssysteme GmbH, Robert-Bosch-Ring 5, 85630 Grasbrunn, GermanyDimensions (HxWxD) 5 in x 6 in x 1.5 in (12 cm x 16 cm x 4 cm)3 | SpecificationsInstall the AE20 using the three-point configuration. The surface mount and octagonal boxinstalls are the only opyions in the three-point install. Refer to the following illustration.Install the cover tamper screw. Refer to illustration below.NOTICE!Refer to the control panel or module installtion instructions for connecting to thecontrol panel.CopyrightThis document is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved.TrademarksAll hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.Bosch Security Systems, Inc. product manufacturing datesUse the serial number located on the product label and refer to the Bosch Security Systems, Inc. website athttp://www.boschsecurity.com/datecodes/.CAUTION!All modules used with this enclosure should be power limited. The totalpower within the enclosure should be no more that 15 W.Bosch Security Systems, Inc.130 Perinton ParkwayFairport, NY 14450USAwww.boschsecurity.comBosch Sicherheitssysteme GmbHRobert-Bosch-Ring 585630 GrasbrunnGermanyFor documentation in your specific language, go to your regional Bosch Security website.

/ 2

Related manuals for Bosch AE20