Black & Decker LST300 Instruction Manual

Also see for LST300: Instruction manual Instruction manual Instruction manual Instruction manual

Contents

1INSTRUCTION MANUAL20V max* Trimmer/edgerKEY INFORMATION YOU SHOULD KNOW:• The guard must be installed before trimming or edging - if not, the motor will overheat.• When replacing the line, use only .065 inch diameter ROUND line (B&D Model #AF-100 isrecommended) - otherwise the trimmer will not function properly.• Do not bump the feed head against the ground - it will disrupt the automatic feed mechanism.Thank you for choosing Black & Decker! To register your new product go towww.BlackandDecker.com/NewOwnerPLEASE READ BEFORE RETURNINg THIS PRODUCT FOR ANY REASON.If you have a question or experience a problem with your Black & Decker purchase, go tohttp://www.blackanddecker.com/instantanswersIf you can’t find the answer or do not have access to the Internet,call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.Please have the catalog number available when you call.SAvE THIS MANUAL FOR FUTURE REFERENCE.vEA EL ESPANOL EN LA CONTRAPORTADA.INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.ADvERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.CATALOg NUMBERLST300