Black & Decker LST300 Instruction Manual

Also see for LST300: Instruction manual Instruction manual Instruction manual Instruction manual

Contents

1INSTRUCTION MANUAL20V max* Trimmer/edgerCATALOg NUMbeRSLST300To register your new product, visitwww.BlackandDecker.com/NewOwnerKeY INFORMATION YOU SHOULD KNOW:• The guard must be installed before trimming or edging - if not, the motor will overheat.• When replacing the line, use only .065 inch diameter ROUND line (B+D Model #AF-100is recommended) - otherwise the trimmer will not function properly.• Do not bump the feed head against the ground - it will disrupt the automatic feedmechanism.Thank you for choosing bLACK+DeCKeR!PLeASe ReAD beFORe ReTURNINg THIS PRODUCT FOR ANY ReASON.If you have a question or experience a problem with your BLACK+DECKER purchase, go tohttp://www.blackanddecker.com/instantanswersIf you can’t find the answer or do not have access to the Internet, call 1-800-544-6986 from8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent. Please have the catalog numberavailable when you call.SAve THIS MANUAL FOR FUTURe ReFeReNCe.veA eL eSPANOL eN LA CONTRAPORTADA.INSTRUCTIvO De OPeRACIÓN, CeNTROS De SeRvICIO Y PÓLIZA De gARANTÍA.ADveRTeNCIA: LÉASe eSTe INSTRUCTIvO ANTeS De USAR eL PRODUCTO.*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload,nominal voltage is 18.