Black & Decker BDSM400 Quick Start Manual

BDSM400 QUICK START GUIDEHOW TO:Measure Room Dimensions:1.) Use the “SET” key to set the datum to measurefrom the “bottom” of the instrument.2.) Tip the sonic transmitter to the forward (bent)position.3.) Move slide switch to distance measurementposition (far right).4.) Turn the instrument on using the switch on therear.5.) Place the unit against a wall - point at a clearunobstructed opposite wall.6.) Press either “read” button on the sides of the unit.7.) The dimension will be displayed.8.) Repeat for the opposite wall.9.) To calculate area, press “X” after the firstmeasurement and “=” after the second.Selecting the datum or measuring point.“SET” Key“SET” KeyPart No. 624046-01

/ 2

Related manuals for Black & Decker BDSM400