Black & Decker 618898-00 Instruction Manual

Contents

WARNING: Read and understand all instructions. Failure to follow all instructions listedbelow may result in electric shock, fire and/or serious personal injury.SAVE THESE INSTRUCTIONSSafety InstructionsDANGER: Laser Radiation, avoid direct eye exposure, serious eye injury can result.• Do not use optical tools such as a telescope or transit to view the laserbeam.• Position the laser so unintentional eye contact will be avoided.• Do not operate the laser around children or allow children to operate thelaser.• Do not disassemble. Modifying the product in any way can increase the riskof laser radiation.WA R N I N G : Use of controls or adjustments or performance of procedures other than thosespecified in this manual may result in hazardous laser radiation exposure.• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,gases, or dust.• Use only with the specifically designated batteries. Use of any other batteries may create arisk of fire.• Store idle product out of reach of children and other untrained persons. Lasers aredangerous in the hands of untrained users.• Use only accessories that are recommended by the manufacturer for your model.Accessories that may be suitable for one laser, may create a risk of injury when used onanother laser.• Repairs and servicing MUST be performed by a qualified repair facility. Repairs performedby unqualified personnel could result in serious injury.• Do not remove or deface warning labels. Removing labels increases the risk of exposure toradiation.• For indoor use only.• This product is intended for use in a temperature range of 41°F(5°C) - 104°F(40°C).CAUTION: Use caution when drilling, nailing or cutting into walls, floors and ceilings whichmay contain electrical wiring or pipes. Always turn off the power when working nearelectrical wires.CAUTION: Use of controls or adjustments or performance of procedures other than thosespecified in this manual may result in hazardous laser radiation exposure.First Aid Measures for Bubble Vial ContentIn case of skin contact, flush with soap and water. In case of eye contact, flush with flowing water.If swallowed, get medical help.Material Safety Data Sheet (MSDS) available from 1-800-544-6986.For your convenience and safety, the following labels are on your laser.Se protéger contre toute exposition – Des radiations laser sont émises par cette ouverture.Evite la exposición a la radiación láser emitida por esta apertura.The label on your tool may include the following symbols.V ..........................volts mW......................milliwattsnm ........................wavelength in nanometers IIIa........................Class IIIa LaserInstalling the BatteryEnsure laser on/off switch is in the full off position. Remove the battery compartment cover(D) by lifting either end as shown in Figure 1. Insert a fresh 9 volt battery making sure tomatch (+) and (-) terminals correctly. Replace the battery compartment cover.VEA EL ESPAÑOL EN LA CONTRAPORTADA.SAVE THIS MANUAL FOR FUTURE REFERENCE.INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.INSTRUCTION MANUALCatalog No. BDL200SCat No BDL200S Form # 618898-00 (MAY- 0 4 - R E V.1) Copyright © 2004 Black & Decker Printed in ChinaFEATURESA.) Expanding Wall PlugB.) Drywall PinC.) Laser On/Off ButtonD.) Battery CompartmentCoverE.) Magnetic MountF.) Horizontal Bubble VialG.) Vertical Bubble VialH.) Level IndicatorsI.) Laser LineA2BGFEDC1HI3WARNING: Batteries can explode, or leak, and can cause injury or fire.To reduce this risk:• Carefully follow all instructions and warnings on the battery label andpackage.• Always insert battery correctly with regard to polarity (+ and -), marked onthe battery and the equipment.• Do not short battery terminals.• Do not charge battery.• Remove dead battery immediately and dispose of per local codes.• Do not dispose of battery in fire.• Keep batteries out of reach of children.• Remove battery if the device will not be used for several months.SAVE THESE INSTRUCTIONSOperating InstructionsExpanding Wall PlugThe expanding wall plug (A) is suitable for use in most wall construction except drywall. Fordrywall, use the drywall pin (B) described below.Insert expanding legs of the wall plug in a predrilled hole in wall (4mm to 8mm diameterholes). The legs must be fully closed prior to inserting in hole. Make sure the stationary ring(b l a c k) is seated firmly against the wall surface and while gripping the stationary ringsecurely, turn rotating ring (o r a n g e) clockwise (per arrow shown on ring) to tighten plug towall. To remove from wall, grip stationary ring securely and turn rotating ring in oppositedirection to loosen.CAUTION: Always be sure the expanding wall plug is in a safe position when not in use.Drywall PinCAUTION: Pin is sharp and should be handled with care. NOTE: The drywall pin(B) canonly be used for drywall, NOT other surfaces including plaster. To press pin into drywall, firstexpose pin by rotating pin base from opposite side. While maintaining pressure on pin base,insert pin straight and seat firmly against drywall surface as shown in Figure 2. The drywall pinshould always be pushed in by hand and never driven by a hammer. To remove drywall pinfrom the wall, pull out straight.CAUTION: Always be sure drywall pin is closed when not in use.Avoid exposure-Laser radiationemitted from this aperture.Se protéger contre touteexposition – Des radiationslaser sont émises par cetteouvertureEvite la exposición a laradiación láser emitida poresta apertura.BEFORE RETURNING THIS PRODUCTFOR ANY REASON PLEASE CALL1-800-544-6986IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE APROBLEM WITH YOUR BLACK & DECKER PRODUCT,CALL 1-800-544-6986BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., ANDDATE CODE (e.g. 20000130M). IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVEYOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.YOUR FEEDBACK IS VITAL TO BLACK & DECKER.

/ 4

Related manuals for Black & Decker 618898-00