P1512120 R3 51Figure 19. Roller out of AlignmentORLOOSEN TIGHTENBefore Aligning the Belt:• The conveyor must be empty of all grain.• Wait until the belt makes a complete revolution before adjusting the rollers. Some belts may have unevenedges, appearing misaligned.To Align the Belt:If your belt is tracking off-center, follow the sections and steps in the order following to center it.Figure 20. Belt Tracking to One Side6.12.1 Adjust the Rollers1. Loosen bearing nuts and jam nuts (if equipped).PORTABLE GRAIN BELT CONVEYOR – S-DRIVE FIELD LOADER 6. MAINTENANCE
