Batco FX1535FL Operator's Manual

Batco FX1535FL Operator's Manual Manual pdf 47 page image

P1512120 R3 47Section 6.8. – Inspect the Hopper Flashing on page 49Section 6.9. – Check the Roller Bearings on page 49Section 6.10. – Check the Roller Lagging on page 496.13. Inspect Belt Lacing on page 53Annually:Section 6.11. – Tension the Conveyor Belt on page 49Section 6.12. – Align the Conveyor Belt on page 50Section 6.16. – Clean and Wash the Equipment on page 55When equipped: Section 6.5. – Check the Gearbox Oil on page 482–3 Years:6.14. Replace the Belt Lacing on page 53When equipped: Section 6.6. – Change the Gearbox Oil on page 48As Required:Section 6.17. – Tension the Drive Belts on page 55Section 6.18. – Align the Drive Belts on page 56Section 6.19. – Replace the Drive Belts on page 56Section 6.20. – Repack the Wheel Bearings with Grease on page 56Section 6.21. – Inspect and Service the Hand Winch and Lift Cable on page 576.15. Replace the Conveyor Belt on page 53Section 6.22. – Pinion Gear Adjustment on page 576.3. Visually Inspect the EquipmentCheck the following during a visual inspection:1. Ensure all guards are in place and in good working order.2. Examine the conveyor for damage or unusual wear.3. Check tightness of bolts/nuts, fasteners, and hardware (re-torque if necessary).4. Be sure all safety decals are in place and are legible.5. Check that the discharge and intake area are free of obstructions.6. Inspect all moving or rotating parts to see if anything has become entangled in them. Remove any entangledmaterial.7. Inspect hydraulic hoses and fittings for leaks and wear. Fix or replace where necessary.8. Examine tires for gashes, uneven wear, or loss of air pressure. Maintain pressure according to tire sidewallrecommendations.9. Check all operating, lifting, and transport components. Replace damaged or worn parts before using theconveyor.PORTABLE GRAIN BELT CONVEYOR – S-DRIVE FIELD LOADER 6. MAINTENANCE