Menu
Barudan BEVT Series Instruction Manual
                                                                                                                                                                                                 | |
Contents
| 
1. LCD DisplayShows machine status, icons, design information*Refer to “Contents on the display”2. Icon key – the A, B, C, D, E-keysThe operation buttons assigned to functions displayed by icons.3. Origin LEDWhen lit the pantograph is located at the origin.Blinks when the Jog Keys are assigned to other functions.4. Origin KeyMoves the pantograph to the origin.When the pantograph is located at the origin, it moves the pantograph to theprevious position in stand-by state, the position of the last stitch inDrive mode.5. Jog KeysMoves pantograph. Single stroke gives 0.1mm movement. Holding the button movesThe pantograph in a continuous movement and the speed gradually increases.Used to move the cursor for selecting.6. Page KeySwitches screen*Refer to “Paging Screen”7. Menu KeySwitches the Menu Icon Keys*Refer to switching the Menu Icon Keys8. Drive KeyPlaces the machine in Drive mode, ready to sew.9. Start KeyThe machine starts sewing.10. Stop KeyThe machine stops sewing.11. Float LEDLit when the pantograph is moving through a pattern without sewing.12. Teach LEDLit when locating/changing existing function codes in a pattern.13. COM (Serial) PorThis is to connect with RS-232 Cable.This can be exchanged to LAN Card or USB Port.14. PS / 2 PortThe PS/2 port for optional barcode reader.Using barcode can skip some operations.15. USB Memory SlotThe USB Memory slotDesigns are loaded/saved onto the USB Memory. It also loads the systemSoftware for the automat.3－3 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved