6.2.2 Projection Study Wizard interfaceFigure 6.3. Projection Study Wizard interfaceProjector surfaceUse these settings to simulate the physical surface that will be projected upon.Type: This setting, Wall or Floor, defines the orientation of created project-ors.Size: Size defines the pixel space (width and height for flat surfaces; radi-us, height, and angle for curved surfaces) in m, cm, mm, ft, or inches.Luminance: Luminance of the projection surface.This parameter should generally remain the default setting of 130lux, unless projection is to take place in a bright environment, suchas outdoors during the day.Surface Gain: Surface gain is the extent to which the surface on which you areprojecting absorbs or reflects light. Values fall between 0.0 (100%absorption) and 1.0 (100% reflection).Pixel size: Pixel size defines the physical width of a projected pixel in milli-meters.Barco Pn: 60600320122Section 6: ToolsBarco Media Server XHD-Series User Guide
