6.2.1 Using the Projection Study WizardTo open the Projection Study Wizard, select the Tools in the menu bar, and select Pro-jection Study Wizard from the Tools menu. (See Figure 6.2, “Projection Study wizard”.)You can also select an object (plane, curved plane, screen, curved screen, or importedobject) from your scene and click the Create Projector Array button in its properties.Figure 6.2. Projection Study wizardProjection Study workflow1. If no object is selected, choose between aiming the projectors at a wall (i.e.horizontally), at a floor (i.e. vertically), or at a curved convex or concavewall.2. If no object is selected, define projection dimensions.3. Adjust "Distance"/"Throw ratio."Keep in mind that these are relative parameters. Change one, and theother is adjusted proportionally.4. Choose an aspect ratio setting."Auto" mode chooses a combination of aspect ratios to best conformto the desired coverage area. Alternatively, you can set all projectorsto a fixed aspect ratio.121Barco Pn: 60600320Barco Media Server XHD-Series User GuideSection 6: Tools
