3. Getting startedBarco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006 _____________________________________________________ 3-353.2.16 ExtenderConnecting to the ProcessorThe data connection between P ROCESSOR and E XTENDER is established with a link interface card in the PROCESSOR andin the E XTENDER, which are connected with a round cable.Figure 3-45Round cable to connect P ROCESSOR and E XTENDERThe cable between Processor and Extender is fragile. It may not last under tension, or beingbent or twisted.The link interface cards consume one PCI slot in the P ROCESSOR and in the E XTENDER.OrderThe connection card is inserted in the PCI slot with the lowest numbers.LinkInter-face1PCI 1 PCI 2 PCI 3 PCI 4Figure 3-46Connection card to the EXTENDER
