Menu
Baicells Nova-436Q Installation Manual
Also see for Nova-436Q: Installation guideInstallation guideInstallation guide
                             | |
Contents
| 
22Figure 3–18: Management ServerTable 3-4: Management ServerField Name DescriptionSSL Enable/Disable Secure Socket Layer (SSL) using ON/OFFManagement Server Enter the management server IP address and port numberCloudKey Operators using the Baicells CloudCore are provided a unique CloudKeyidentifier that may be used when configuring UEs and eNBs. If entered inthis field, when the device is powered on it will immediately associate tothe operator's OMC account. You can find your CloudKey ID when youlog in to the CloudCore. It is displayed in the top bar.3.6.5 Configure Quick SettingsUnder BTS Info > Quick Setting window (Figure 3–19) are several important fields you mustconfigure or check. First, if the operator is using the Baicells CloudCore EPC, you must enter afixed MME IP and PLMN setting, as shown below:• MME IP = 10.3.0.4• PLMN = 31198Do not change these settings unless you are connecting to a Local EPC or different vendor EPC.Second, enter the operator-specific settings such as Band, Bandwidth, EARFCN, Cell ID, PCI,and TAC. These settings are normally planned and coordinated by the operator. Make sure theCloud EPC field is set to ON when using the Baicells CloudCore. Some Quick Setting fields suchas Duplex Mode and Frequency will auto-fill based on the eNB hardware model.If you are testing the eNB in a lab environment, turn the power down as low as it will go underthe Power Modify field. For a description of all the Quick Setting fields, refer to the BaicellsConfiguration & Network Administration Guide. |
Related manuals for Baicells Nova-436Q
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved