CHAPTER 2 – Safety informationChap. 2- 49/ 52 -2.16.11 Residual risks during height work2.16.11.1 Height work – (Risk ID: 16.01)IDENTIFICATION RISK ASSESSMENTStage: MaintenancePerson: Maintenance personnelArea: Z00 All areasInitial risk: HIGHRESIDUAL RISK: MEDIUMPLr (EN 13849): -SIL (EN IEC 62061): -ACCIDENT SCENARIOConsequence: 1.11 Slipping, tripping and fallingSituation: Maintenance work required by the manufacturer for which the maintenanceoperator must work at height.Event: Risk of slipping, tripping and falling off permanent access equipment and/ormachine structures.Body part: Entire body, head.RESIDUAL RISKThere is a risk of slipping, tripping and falling when climbing, descending or standing on ladders,scaffolding and/or permanent footbards,LIMITATION MEASURESMechanical: There is no permanent access equipment.Electrical: -Informative: - It is forbidden to climb onto machine structures from any point that is not equippedfor climbing.- Always use permanent access equipment on the machine for all height work.- Where the machine is not fitted with permanent access equipment, use ladders,scaffolding and/or moving platforms.- Wear personal protective equipment /PPE) suited for height work.- Move carefully when climbing or descending ladders or standing at heights.Symbols: -
