TWIN – Use and maintenance instruction manualChap. 2- 10/ 52 -DANGER IMAGES 2 of 4SYMBOL DESCRIPTION OF HAZARD INDICATIONS/WARNINGSCrushing of lower limbsKeep a safe distance from the indicatedzones to prevent lower limb crushing.Watch out for all movements of the unitwhere the image is located. Follow thesafety provisions.ImpactBe careful near protruding or sharpmachine parts. Follow the safetyprovisions.Shock hazard (head or parts of thebody) or snaggingBe careful near protruding or sharpmachine parts and any hindrances. Followthe safety provisions.Falling in openings/hatches Watch out for holes in the floor and for anyports or trap doors.Slipping and fallsWatch out for objects or slipperysubstances on the floor. Immediatelyremove the objects and clean the floor fromsubstances.Tripping and fallsWatch out for foreign matter laying on thefloor that could cause tripping. Immediatelyremove the obstacles.Danger of falling from aboveIn case of overhead work. Comply with thesafety dispositions and adopt theappropriate PPE (safety belt).Danger of falling due to heightdifferencesWatch out for any differences in the heightof different machine zones.Dangers of an electrical natureBe careful near the indicated zones.Maintain a safety distance in order to avoiddangers stemming from direct or indirectcontact with parts or equipment withvoltage. Follow the safety provisions and,in case of operations, wear the appropriatePPE (safety gloves against electrical risks).Heat-related hazardsBe careful near the indicated zones.Maintain a safety distance to prevent burnscaused by high temperatures. Follow thesafety provisions and wear the appropriatePPE (safety gloves against heat and fire-related hazards).
