Menu
Baby Lock Palette Instruction Manual
                                                                                                                                                                                                                                                                               | |
Contents
| 
237Tips and TechniquesTips and TechniquesEnlarging/Reducing Stitch PatternsImported stitch patterns can be enlarged or reduced in Layout & Editing in the following three ways.1 Stitch patterns can be simply enlarged/reduced.2 Stitch patterns can be enlarged/reduced while the key is held down.3 Using the Stitch to Block function, stitch patterns can be enlarged/reduced after being converted to amanual punching pattern.With method 1, the stitching will become more dense or light without the number of stitches sewn changing.In other words, greatly enlarging or reducing the pattern changes the quality of the embroidery since the threaddensity is adjusted. Use this method when only slightly enlarging/reducing the stitch pattern.With method 2, the size of the pattern is changed while maintaining the thread density and needle drop pointpattern. However, if the original thread density and needle drop point pattern in the stitch pattern are notuniform, the thread density and needle drop point pattern may not be maintained, even by using this method.Enlarge/reduce the pattern while checking the preview. Do not use this method when only slightly enlarging/reducing the stitch pattern.With method 3, the thread density is maintained while the pattern is enlarged/reduced. However, the needledrop point pattern is not entirely maintained. Use this method when you wish to change the stitching or shape.Do not use this method when only slightly enlarging/reducing the stitch pattern.Sewing DirectionIn order to limit shrinking, select a stitch direction perpendicular to the larger edge of the area.Sewing OrderAfter creating an embroidery pattern made of several different parts (in Layout & Editing or Design Center), besure to check the sewing order and correct it if necessary.With Layout & Editing, the default sewing order is the order in which the elements are drawn.With Design Center, the default sewing order is the order in which the sewing attributes are applied.This software allows you to create a wide variety of embroidery patterns and supports wider ranges for thesetting of the sewing attributes (thread density, sewing pitch, etc.). However, the final result also dependson your particular embroidery machine model. We recommend that you make a trial sewing sample withyour sewing data before sewing on the final material. Remember to sew your trial sample on the sametype of fabric as your final material and to use the same needle and the same machine embroidery thread.CtrlShrinking more likely to occur Shrinking less likely to occur |
Related manuals for Baby Lock ECS8
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved