Asus RP-AC53 Quick Start Manual

Also see for RP-AC53: Quick start guide Quick start guide

Contents

ENGLISH54. Follow the Quick Internet Setup steps below to set up theRepeater:• Connect to a Wi-Fi network and when prompted, enter thesecurity key. If your Wi-Fi network is hidden, click Manualsetting.• You can either tick Copy AP SSID/Password, Use the defaultsetting or enter the SSID and security key/password for yourextended network. When done, click Connect.NOTE: When you have ticked Use the default setting, the Re-peater’s wireless network name (SSID) changes to your existingWi-Fi network name, ending with _RPT or _RPT5G and sharesyour router/AP’s Wireless Password.• Connect your wireless devices to the new Extender network.Move the RepeaterWhen the connection is complete, locate the Repeater betweenthe router/AP and the wireless device to get better performance.After placing your RP-AC53 in an ideal location, RP-AC53 con-nects to your router/AP in about one (1) minute.NOTES:• Place your RP-AC53 between your router/AP and wirelessdevice to get the best extender performance.• Place your RP-AC53 in a location where you can get green ororange Wi-Fi LED.IMPORTANT! We recommend that you place your RP-AC53 inopen or spacious location.Signal Indicator• To get the best performance, place the Repeater betweenyour router/AP and wireless device.• The Wi-Fi signal indicator indicates the connection perfor-mance from the Repeater to the router/AP. Refer to the Wi-FiLED indicator in section A Quick Look.Wi-Fi LED 2.4 GHz / 5 GHz performanceGreen Best performanceOrange Good performanceRed Poor performanceU11933_RP-AC53_QSG_V2.indb 5 2016/8/19 17:44:20