Asus RP-AC51 Quick Start Manual

Also see for RP-AC51: Quick start guide Quick start guide

RP-AC51Wi-Fi AC RepeaterQuickStart GuideE12398 / First Edition / March 2017LED explanationsPOWEROn: RP-AC51 is power on.Off: RP-AC51 is power off.EXISTING NETWORKOn: Connected to the router/AP.Off: Not connected to therouter/AP.MOVE CLOSERNeed to move RP-AC51 closerto the router/AP.MOVE AWAY SLIGHTLYNeed to move RP-AC51 slightlyaway from the router/AP.Button explanationsPOWER SWITCHSwitch this button on/off to turnRP-AC51 on/off.WPS BUTTONPress this button to quicklyconnect to the router/AP via theWPS method.RESETBUTTONUse a pinto push thisbutton to resetRP-AC51 toits factory de-fault settings.ResetBEFORE SETUP WE SUGGEST...around 2 meters1 Place your RP-AC51 near yourrouter/AP.2 Check the LEDs and see theLED explanations.1 Plug your RP-AC51 to apower outlet.2 Turn on the power switch.Wait until the power LED turns blue,indicating that your RP-AC51 is ready toconnect to your existing router/AP.1 Press the WPS button on yourrouter/AP.2 Press the WPSbutton on yourRP-AC51 formore than two (2)seconds until thepower LED startsto blink.NOTE: Wait until the existing network LED blinksfor about two (2) minutes, then turns solid blue,indicating the WPS process is completed.Your RP-AC51’s wireless network name (SSID) changes to your existing Wi-Fi network name,ending with _RPT or _RPT5G and shares your router/AP’s Wireless Password.1 Tap SET UP EXTENDER.2 Open your phone Wi-Fi, and connectto your RP-AC51’s SSID.3 Follow the Quick Extender Setup instructions.4 Assign a unique network name (SSID) for your extendednetwork.5 Wait until the setup is completed.SETUP METHODSAPP SUPPORTMETHOD 1WPS SUPPORTMETHOD 2Download the app01 Use the app02Connect via WPS01 Enjoy Wi-Fi02Placing your RP-AC5101 Power On02E12398_RP-AC51_QSG_Special_A3.indd 1 2017-04-05 16:37:57

/ 2

Related manuals for Asus RP-AC51