26 Chapter 2Changing the wakeup settings1. Tap > Settings > Personal tab > Wakeup Source icon.2. Check the boxes of the items to control what functions/conditions willturn on the deviceʼs power. Pressing any one of the function buttons onthe front panel wakes up the device.3. Tap ok when done.Changing the USB settingsTo change the USB settings:1. Tap > Settings > Connections tab > USB Settings icon.2. Choose a USB Interface.• Transmission as Network Interface - configures your device asa network card so that you can connect it to a PC to browse theInternet, etc.• Transmission as Serial Interface - allows a serial connectionbetween your device and PC. Select this when using ActiveSync.• Simulation as Card Reader - turns your device into a massstorage unit similar to a card reader.3. Tap ok when done.To change the USB charging mode:1. Tap USB Charger tab from the USB Settings screen.2. Choose a USB charging mode.• Slow Charging - to use this mode, your PC needs to support100mA.• Fast Charging - to use this mode, your PC needs to support500mA.3. Tap ok when done.NOTE To avoid overcharge, charging automatically stops after 5hours. In Fast Charging mode, the device is able to be fullycharged within 5 hours, but in Slow Charging mode, it isneccessary to connect the device again to the power sourceto get it fully charged.
