Getting Started 7Additional storageMyPal A636N comes with the standard SD card slot while MyPal A632Nhas an additional mini SD card slot. The SD card slot can be insertedwith SD or MMC memory cards. It also supports SDIO cards of variousfunctionalities including 802.11b/g, modem, etc.LabelInstalling and removing SD/MMC/SDIO card1. With the label side (usually the side with the cardmanufacturerʼs name) face up, and the barcode/serial number side face down, insert the card intothe SD card slot located on top of the device.2. Push the card all the way into the slot until it fitscompletely. If properly installed, the SD or MMCcard edge aligns with the top edge of the device.SDIO cards usually have an extended part thatprotrudes over the slot edge.3. To remove, press the card slightly until it ejectsout. You may then safely remove the card.NOTE An SD/MMC/SDIO/mini SD card fitsonly in one orientation, and slidessmoothly into the slot if insertedcorrectly. DO NOT force the card intothe slot!1. Flip open the mini SD card slot cover.2. With the label side (usually the sidewith the card manufacturerʼs name)face up, and the barcode/serialnumber side face down, insert thecard into the mini SD card slot locatedon the left side of the device.Installing and removing mini SD card(for A632N only)Label side3. Push the card all the way into the slot until it fits completely.4. To remove, press the card slightly until it ejects out. You may thensafely remove the card.
