4 8PPC-153 User's Manual9. Connect the FDD cable (26-pin to 26-pin) and CD-ROM cable (40-pin to 40-pin). The other end of the FDD cable is connected toconnector CN10 on the PC board. The other end of the CD-ROMcable is connected to connector CN18 on the PC board.10. Slide the FDD assembly and slim CD-ROM assembly toward theinside of the panel PC, as far as they will go.11. Secure the two screws ("A") of the metal plate to the shieldingcase.Figure 4-5: Installing the FDD and slim CD-ROM driveMetal plate3.5" floppy driveAA