Split System UnitSTART-UP FORM:RC/FC SeriesDANGERELECTRICAL SHOCK HAZARDDisconnect electric before service.More than one disconnect switchmay be required to disconnectelectric from equipment.Equipment must always beproperly grounded.SEVERE INJURY HAZARDDo not enter equipment while inoperation. Equipment may startautomatically. Do not operate withaccess doors open. Installation,operation, and maintenancemust be performed by a trainedtechnician only.BURN HAZARDAllow equipment to cool beforeservice. Internal components ofequipment may still be hot afteroperation.WARNINGFALLING HAZARDUse proper safety equipment andpractices to avoid falling. Do notuse any part of the equipment asa support.Failure to follow these instructions can result indeath, injury, or property damage.EXPLOSION HAZARDSystem contains R-410Arefrigerant. Operating pressuresmay exceed limits of R-22 serviceequipment. Use proper refrigeranthandling practices, tools, andequipment. Failure to follow theseinstructions can result in death,injury, or property damage.7050 Overland RoadOrlando, FL 32810Tel.: 407-292-4400 ∙ Fax: 407-290-1329www.addison-hvac.comDEDICATED OUTDOOR AIR SPECIALISTSPart Number:ADFMRCSTRev.: 06 June 2018DS*ADFMRCST*Field start-up should be performed by a qualified technician.The technician is responsible for assuring that all of theitems on the unit start-up checklist are properly installedand operating. Upon completion, a copy of the form shouldbe returned to Addison, using the contact information listed.Installation Code and Quarterly Inspections:All installation and service of ADDISON® equipment mustbe performed by a contractor qualified in the installationand service of equipment sold and supplied by Addisonand conform to all requirements set forth in the ADDISON®manuals and all applicable governmental authoritiespertaining to the installation, service, operation and labelingof the equipment.To help facilitate optimum performance and safety,Addison recommends that a qualified contractor conduct,at a minimum, quarterly inspections of your ADDISON®equipment and perform service where necessary, using onlyreplacement parts sold and supplied by Addison.Further Information:Applications, engineering and detailed guidance on systemsdesign, installation and equipment performance is availablethrough ADDISON® representatives. Please contact usfor any further information you may require, including theInstallation, Operation and Service Manual.This product is not for residential use. This document isintended to assist licensed professionals in the exercise oftheir professional judgment.Technician Name:Start-Up Date: