Adaptec SCSI RAID 2100S Installation Manual

Also see for 2100S - SCSI RAID Controller: Installation guide Quick start guide Software user's guide Installation guide Installation guide

Contents

Adaptec SCSI RAID 2100S Installation Manual Manual pdf 59 page image

3-24Adaptec RAID Installation Guide13 Select Edit startup.ncf. If needed, edit the file so that i2opci.nlmis listed before bkstrosm.ham in your startup.ncf file.14 Shutdown and restart the server.Installing the Driver for a Boot Controller in a NewNetWare 5 ServerIn this scenario, you are installing the Adaptec RAID controller as aboot controller in a new NetWare 5 server. To install the driver1 Create a driver floppy disk using the Adaptec RAID Installation CD.To create the diska Insert the Adaptec RAID Installation CD in your drive and ablank floppy disk in the floppy disk drive.b Copy all the files in \packages\netware\5.x\driver to the floppydisk.c Remove the Adaptec RAID Installation CD and the driverfloppy disk.2 Install the Adaptec RAID controller as the primary controllerand attach the disk drives.3 Start up the server. During restart, press Ctrl+A to start SMOR.Use SMOR to create the RAID. For details, refer to UsingSMOR on page 2-10.4 Install and configure a secondary controller, if any.5 Create a directory on the C drive named nwupdate.6 Insert the driver disk you created in Step 1.7 Copy a:\ to c:\nwupdate.8 Start the NetWare installation program from the CD.9 On the Server Drivers – Summary menu, highlight Disk andCD-ROM Drivers and press Enter.10 When prompted select i2opci.nlm and bkstrosm.ham asdrivers.11 Complete the NetWare installation according to the Novelldocumentation.