Acumen Ai-T40 User Manual

Contents

Acumen Ai-T40 User Manual Manual pdf 50 page image

DVR User Manual457 Remote Surveillance7.1 IE Remote SurveillanceIn order to view the DVR from a network it must be connected to a LAN/WAN or internet.The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVRsupports IE browser, on Windows XP and Vista platform.7.1.1 On LANStep 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address,Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.Step 2: Enter Record Setup to set network video parameters like resolution, frame rate etc.Step 3: Open IE on a computer on the same network. Input the IP address of the DVR in IEaddress bar and press enter.Step 4: IE will download ActiveX component automatically. Enter the username and passwordin the subsequent windowNotice: If HTTP port is not 80, other number instead, need add the port number afterIP address. For example, set HTTP port as 82, need input IP address like192.168.0.25:82.User name and password here are the same with that used on the DVR. The defaultusername and password is admin and 123456.7.1.2 On WANThere are two ways for the DVR to connect to internet.1. Connect the DVR to internet through router or virtual serverStep 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address,Subnet Mask, etc. If using DHCP, please enable DHCP in both the DVR and router.Step 2: Forward IP address and port number in Virtual Server setup of the router or virtualserver. Configure the firewall to allow accessing the DVR. (If the user has enabled the UPnPfunction in both the DVR and router, he can skip this step.)Step 3: If users want to utilize dynamic domain name, please apply for a domain name in aDNS server supported by the DVR or router. Then add to the DVR or router.This unit supports www.meibu.com，www.dyndns.com, www.no-ip.com and mintdns type.Step 4: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP portis not 80, add the port number after IP address or domain name.Step 5: IE will download ActiveX automatically. Then a window pops up and asks for username and password. Input name and password correctly, and enter to view.Note: If you cannot download and install ActiveX, please refer to FAQ Q8.