Acumen Ai-T40 User Manual

Contents

Acumen Ai-T40 User Manual Manual pdf 27 page image

DVR User Manual22Fig 4-15 Schedule Configuration-ScheduleYou can also set week schedule by double-clicking in the grinding area. This will take you tosee a dialog box as below.Step 1: Select a day and click “Add” button to schedule start time and end time. Then clickto save.Step 2: Select other days and add schedule or copy settings from one schedule to the othersunder the Apply Settings To item.Schedule-Week Schedule4.4.2 Motion ScheduleThis tab allows to set schedule for motion based recording. The setting steps are as follows:Step 1: Enter into MenuSetupSchedule Motion tab.Step 2: The setup steps for schedule for motion based recording are similar to normal schedulesetup. You can refer to 4.4.1 Schedule for details.Note: The default schedule of motion based recording is 24ⅹ7. If you want to activatemotion based recording, you must enable motion alarm and setup schedule for motionalarm (see Chapter 4.5.2 Motion Alarm for more details).4.4.3 Sensor Schedule