Acumen Ai-T40 User Manual

Contents

Acumen Ai-T40 User Manual Manual pdf 34 page image

DVR User Manual29item and check PPPoE checkbox and then enter username and password. Once the setupis completed, your DVR will automatically dial up into your network.Step 5: Test the effectiveness of the network by clicking “Test” button after you set up thenetwork.Step 6: If the network is well connected, please click “Apply” button to save the setting.4.6.2 Sub StreamTo setup sub stream:Step 1: Enter into MenuSetupNetwork Sub Stream interface. Refer to Fig 4-25:Step 2: Select fps, resolution, quality, encode and max bit rateStep 3: Select “All” to set the same settings for all channels.Fig 4-25 Network Configuration-Sub Stream4.6.3 EmailTo set up Email:Step 1: Enter into MenuSetup NetworkEmail interface. Refer to Fig 4-26:Step 2: Set SMTP Server and port.SMTP Server/Port: The name and port number of SMTP server. You can setup SSL check(such as Gmail) according to actual needs.Parameter MeaningFPS Frames per second.Resolution Support CIFQualityThe quality of the clients‟ image. The higher the value is, theclearer the record image. Six options: lowest, lower, low, medium,higher and highest.Encode VBR and CBRMax bit rate Range from: 31~768kbps