• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 11Chrysler Diagnostics7Device Controls MenuAll items marked with “-” are covered in section 3 or 4.These items are not covered in this section.❒ Device Controls Menu❒ Switch Test❒ Actuator Test❒ Idle Speed Test– Review Data– Print Data– Tool SetupSwitch Test✓ The Switch Test is used to test the operation of switches on var-ious Chrysler vehicle systems. These systems may include cruisecontrol, A/C, braking, and the shift lever position.✓ Because of differences in vehicle designs, the Switch Test maynot test the same switches in every car.NOTE: Switch Test is only available on 1989-1995 Chrysler vehicles.From the Device Controls Menu:1.Select Switch Test.•Use UP or DOWN arrowkey until Switch Test ishighlighted.•Press ENTER.2. Select switch to test.•Use the UP or DOWNarrow key.•Press ENTER.✓ Switches for the engine andtransmission are combined intoone list when applicable.IMPORTANTSwitch TestActuator TestIdle Spe ed TestReview DataPrint DataTool SetupDevice Controls MenuA/C CLUTCH RELA/C SWITCH SENA/C REQUESTAIR SW SOLASD RELAYBRAKE SWITCHCHECK ENG LTSelect Sw to Test
