ActionTec USB Bluetooth User Manual

ActionTec USB Bluetooth User Manual Manual pdf 5 page image

Installing the USB WirelessBluetooth AdapterThe instructions that follow provide a visual guide to setting up the ActiontecUSB Wireless Bluetooth Adapter. It is recommended the user follow theseinstructions prior to attempting any other procedures. This manual will guideyou through the hardware and software installation and configuration.2.1 Install the Software+ STOP!!!: You must install the Bluetooth Software PRIOR to connectingyour Bluetooth Adapter to the computer. If you have alreadyconnected the Bluetooth Adapter, please remove it now and restartyour computer.1. Make sure your computer is turned on, then put the Actiontec InstallationCD-ROM in your CD-ROM drive.2. The Installation software should start automatically. This may take a fewmoments.When you see this window. Click Next to continue+ Note: If you do not see the window above, click Start on the taskbarand then select Run. Type d:/setup (or e:/setup, depending on thedrive letter of your CD-ROM drive), then click OK.32