Acorp 4D533 User Manual

Contents

Acorp 4D533 User Manual Manual pdf 63 page image

INSTANTLY AVAILABLE PC6.5 Using Suspend to RAM☆ How to put your system into Suspend to RAM (STR) sleep stateThere are several ways to initiate Suspend to RAM(STR):Note: The Message LED should be blinking while system is in standby, Suspend to RAMmode. Depending on the mainboard and the chassis designs, the Message LED may bethe Power LED or other LED on the front panel of the chassis.☆ Using the mouse button:1. From the "Start" menu in Windows 98, select "Shut Down".2. Select "Stand by" in the Shut Down Windows dialog box.3. Press "OK" to enter the "Suspend to RAM (STR)" sleep state.☆ Setting the standby time1. Enter "Control Panel".2. Double-click the "Power Management" icon.3. "Power Management Properties" dialog box appears. Select "Power Schemes" tab.4. Use "System standby" option to set the time for the system toautomatically enter standby mode when the system is not in use.☆ Using the system power button:1. Enter "Control Panel".2. Double-click the "Power Management" icon.3. In the Power Management Properties dialog box, select "Advanced" tab.4. Define the System Power Button to be "Standby" or "Shutdown":☆ StandbyWhen the power switch of the front bezel or "Sleep" key of the Windows98 keyboard is pressed, Windows 98 will enter "Suspend to RAM"mode and later can be waken up by pressing the "Wakeup" key or powerswitch.Now you can press the Power on button to enter the "Suspend to RAM(STR)" sleep state.☆ ShutdownSystem is turned off almost immediately without corrupting the data.User’s Manual 63