Menu
Acme Packet Net-Net 6300 Hardware Installation Manual
                                                                                                                    | |
Contents
| 
46 Net-Net 6300 Hardware Installation Guide Version 1.0SYSTEM INSTALLATION3. Push the Net-Net 6300 fully into the equipment rack.4. Line up the chassis-mounted thumb screws with the threads on the mountingspacer. You may have to adjust the spacer locations before they line up with theNet-Net 6300 captive screws.5. Once correctly positioned, screw the thumb screws into the mounting spacerand secure the chassis in the rack.6. Fully tighten all 4, 10-32 x 5/8” front screws that hold the stationary rails to therack.Center-mount 2-Post Chassis InstallationThe following sections explain how to mount your Net-Net 6300 in a center-mount,2-post equipment rack. The Net-Net 6300 in a center mount installation looks likethis:Installing theCenter-mountHardwareCenter mounting ears are attached to each side of the Net-Net 6300. Thesemounting ears are reversible, and are not mated to a specific side of the chassis.While the Net-Net 6300 is shipped with all mounting hardware for attaching therack ears to the chassis, you must obtain and use the appropriate hardwarerecommended by the equipment rack’s manufacturer for mounting the system in therack. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved