Menu
Acme Packet Net-Net 6300 Hardware Installation Manual
                                                                                                                    | |
Contents
| 
Version 1.0 Acme Packet, Inc. Technical Publications 313 System InstallationIntroductionThis chapter provides information about how to install the Net-Net 6300 and itsassociated components, includes cabling information.Shipped PartsEach Net-Net 6300 ships in one box. Inside this box is the Net-Net 6300 chassis andthe accessory kit. The ordered NIU and power supplies are already installed in thechassis.The following table lists the contents of one Net-Net 6300 order.Installation Toolsand Parts The following tools and parts are required to install the Net-Net 6300 into yourequipment rack.• #2 Phillips-head screwdriver• Rack and associated mounting hardware.• Shielded Ethernet CAT5e or CAT6 RJ45 cables.RecommendedTools and Parts We recommend that you have the following parts on hand.• Cable labels• UPS for AC installations• ESD wrist, heal straps• ESD safe locationRack SystemInstructions The following or similar rack-mount instructions are included with the installationinstructions:• Elevated Operating Ambient- If installaed in a closed or multi-unit rackassembly, the operating temperature of the rack environment may be greaterthan room ambient. Therefore, consideration should be given to installing theequipment in an environment compatible with the maximum ambienttemperature (Tma) specified by the manufacturer.Location ItemMain Shipping Box Net-Net 6300 chassisAccessory Kit DB9 to RJ45 Console adapterAC or DC power cords, one per power supplyGrounding cable with lugSlide extender kit for rack mounting |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved