5-10 User’s GuideHOST ADAPTER SCSI TERMINATIONThis parameter allows you to configure the host controller SCSItermination function. Figure 5-5 shows the possible settings. Thedefault setting is Enabled.Figure 5-5 Host Adapter SCSI TerminationUse the or keys then press to make a selection. Pressat anytime to return to the previous menu.If the AIC-7880 is not at one end of the SCSIcable, the terminating resistors located onthe system board must be disabled by settingthe SCSI terminator to Low OFF/High OFF.See Figure 5-5. The three resistors are inthe SIP packages installed in the sockets.
