Setup 6-156.5 Power Management SettingsBesides accessing this screen from POST (F2), you can also press Fn-F6during runtime (system operation) to access this section of the BIOS Utility.Power Management SettingsPower Management Mode ------------- [Enabled]Display Standby Timer ------------- [ 1] Minute(s)Hard Disk Standby Timer ----------- [ 1] Minute(s)System Sleep Timer ---------------- [ 3] Minute(s)System Sleep Mode ----------------- [Hibernation]System Resume Timer Mode ---------- [Disabled]System Resume Date ---------------- [--/--/----]System Resume Time ---------------- [--:--:--]Modem Ring Resume On Indicator ---- [Enabled]Battery-low Warning Beep ---------- [Enabled]Sleep Upon Battery-low ------------ [Enabled]↑↓=Move Highlight Bar, →←=Change Setting, F1=Help, Esc=Exit6.5.1 Power Management ModeWith enabled, all the power management timers take effect unlessspecifically disabled by the user. Select [Disabled] to turn off all thetimers. The default setting is [Enabled].You cannot disable this parameter in BIOS Utility if APM isinstalled under DOS, Windows or Windows 95. To disableAPM, type Power Off under DOS, or disable the Power iconin the Windows Control Panel.
