133 Altos R520 Installation Configuration Guide6. At the Installation Settings, select the Software and click on Detailedselection to add kernel-source and C/C++ Compiler and Tools to install.7. To add C/C++ compiler tools, please check C/C++ Compiler and Tools inthe left window.8. To add kernel-source, please select Various Linux Tools in the left windowand check kernel-source in the right window.9. After you add the kernel-source and C/C++ Compiler and Tools, pleaseclick on Accept and follow the instruction to complete the installation.Gigabit Ethernet Driver Installation1. You can find the Intel 82546EB driver in EasyBUILD. Please refer todirectory of the 82546EB driver in Driver Required section and copy thedriver from the EasyBUILD to HDD first.# mount /media/cdrecorder /mnt# cp –R /mnt/Disk/R520/NIC/Intel/pro1000.lx/. /tmp2. Change the directory to the driver source and install the driver# cd /tmp/src/# make install# insmod e1000.ko3. Run the YaST2 utility.# YaST24. Select Network Devices -> Network Card, it will auto detect the Intel82563EB network controller and help you to configure it.RAID Utility Installation1. You can find the RAID Web Console 2 in EasyBUILD. Please copy the utilityfrom the EasyBUILD to HDD first.# mount /media/cdrecorder /mnt# cp –R /mnt/app/R520/raid/Integrated_SAS/Linux/. /tmp2. Install RAID Web Console 2 utility# cd /tmp/# unzip ir3_Linux_RWC2_v1.13-00.zip# chmod 755 install.sh# chmod 755 RunRPM.sh# ./install.sh3. Type y to accept the license agreen and select 1 for full installation.
