2-9 System UtilitiesRemoving a PasswordPerform the following to remove a password:NOTE:Below are the procedures for removing the supervisor password. The same procedures applyin removing the user and HDD passwords.When the supervisor password is removed, the user password is automatically removed.1. Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and pressEnter. The Set Supervisor Password dialog box appears.Figure 2:8. Set Supervisor Password2. Type the current password in the Enter Current Password field and press Enter.3. Press Enter twice without typing anything in the Enter New Password and Confirm NewPassword fields. The Setup Notice dialog box appears.Figure 2:9. Setup Notice4. Press Enter to complete the password setting. The computer sets the SupervisorPassword Is parameter to Clear.5. Press F10 to save changes and exit BIOS Setup Utility.Set Supervisor PasswordEnter Current Password [ ]Enter New Password [ ]Confirm New Password [ ]Setup NoticeChanges have been saved.[Continue]Downloaded from www.Manualslib.com manuals search engine