System Utilities 2-6SecurityThe Security tab allows the user to configure and protect the computer from unauthorized use.Figure 2:3. BIOS SecurityNOTE:When prompted to enter the password, three attempts are allowed before system halts.Resetting the BIOS password may require the computer to be returned to the dealer.Parameter DescriptionSupervisor Password Is Displays “Set” if the supervisor password is set and “Clear” if thesupervisor password is not set.User Password Is Displays “Set” if the user password is set and “Clear” if the userpassword is not set.HDD Password Is Displays “Set” if the HDD password is set and “Clear” if the HDDpassword is not set.Set Supervisor Password Option to set the supervisor password.Set User Password Option to set the user password. Enabled only when the supervisorpassword is set.Set HDD Password Option to set the HDD password.Password on BootEnable or disable the computer to prompt for the password onsystem boot. When disabled, the password is only prompted whenentering the BIOS Setup Utility.F9 Setup DefaultsF10 Save and ExitF1EscHelpExitSelect ItemSelect Menu EnterF5/F6Select Sub-MenuChange ValuesInsydeH20 Setup Utility Rev. 3.7MainItem Specific HelpInstall or Change the password and thelength of password must be greater orequal one word.Supervisor Password Is: ClearUser Password Is: ClearHDD Password Is: ClearSet Supervisor Password [Enter]Set User Password [Enter]Set HDD Password [Enter]Password on Boot [Disabled]Information Security ExitBootDownloaded from www.Manualslib.com manuals search engine
