2-7 System UtilitiesSetting a PasswordPerform the following to set the supervisor password:1. Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and pressEnter. The Set Supervisor Password dialog box appears.Figure 2:4. Set Supervisor Password2. Type the password in the Enter New Password field.NOTE:Passwords are not case sensitive and the length must not exceed 12 characters. Thefollowing characters may be used in a password.IMPORTANT:Use care when typing a password. Characters do not appear on the screen.3. Retype the password in the Confirm New Password field.4. Press Enter. The Setup Notice dialog box appears.Figure 2:5. Setup Notice5. Press Enter to complete the password setting. After setting the supervisor password, thecomputer sets the Supervisor Password Is parameter to Set.6. Press F10 to save changes and exit BIOS Setup Utility.A - Z Alphabets A through Z (Not Case Sensitive)0 - 9 Numerical Characters- Dash= Equal Sign[ Left Bracket] Right Bracket. Period, Comma; Semi-colon/ Slash\ Back-slashSet Supervisor PasswordEnter New Password [ ]Confirm New Password [ ]Setup NoticeChanges have been saved.[Continue]Downloaded from www.Manualslib.com manuals search engine
