Menu
Accuprint AP42CL 8000 Service Manual
                                                                                                                                      | |
Contents
| 
94MS42 Rev. B1 S/W Ver. 2.06 4-7[AUAC] Press and release the e key until [AUAC] appears in the Exposure window.This places you in the automatic vacuum option.• Press the V key to cycle the automatic vacuum mode ON or OFF.• Press the 0 key twice to exit this mode.Auto Step ModeNote: This feature allows you to run a series of exposures in sequence.Note: If Auto Step is selected, the LED over the U key will indicate ifthe feature is ON or OFF. If ON, press the V key to turn it OFF.• Press the P key on the integrator to power up the light, the front remoteswitches, and the exposure unit's computer system.[SEL_] Press 1,2,3t4 in sequence. The Vacuum window will read[SEL_]. This places you in the select mode.• Press the Y key once. The Memory window will read [Su].[AStP] Press and release the e key until [AStP] appears in the Exposure window.This places you in the autostep option.• Press the V key to cycle the Auto-Step mode ON or OFF.• Press the 0 key twice to exit this mode.Set Default Vacuum DelayNote: This feature is used to provide sufficient vacuum drawdown timebefore exposure. The time begins when the frame lid is closedwith the [AUAC] turned ON, or when you press the G button forthe first time. If you press the G button again before the vacuumdelay counts down, the frame will move into the cabinet, but theexposure will not start until the time is completed.Note: This default delay time will be ignored if a delay time other than0 has been programed into the memory location being displayed.• Press the P key on the integrator to power up the light, the front remoteswitches, and the exposure unit's computer system.[SEL_] Press 1,2,3t4 in sequence. The Vacuum window will read[SEL_]. This places you in the select mode.• Press the Y key once. The Memory window will read [Su].[dUAC] Press and release the e key until the Exposure window reads [dUAC].• Press the V key and enter the time you wish the vacuum turned ONbefore the exposure begins. The time you selected has now beenprogramed for all memories.• Press the 0 key twice to exit this mode. |
Related manuals for Accuprint AP42CL 8000
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved