Menu
Accuprint AP42CL 8000 Service Manual
                                                                                                                                      | |
Contents
| 
94MS42 Rev. B1 S/W Ver. 2.06 4-14. Integrator Program Set UpTo Enter the Select ModeNote: This step must be followed in several of the program set ups.• Press the P key on the integrator to power up the light, the front remoteswitches, and the exposure unit's computer system.[SEL_] Press 1,2,3t4 in sequence. The Vacuum window will read[SEL_]. This places you in the select mode.Lock Level FeatureThe lock levels are provided to keep operators from accessing any featuresand functions that should be left alone. There are five different lock levelsavailable. Lock levels 1 - 3 allow the locking of individual memorylocations, while lock levels 0 and 4 apply to all of the memory locations.• Level 0 - No locks. Most of the features and functions can be accessedby any operator.• Level 1 - Locks functions per memory (seconds, exposure, vacuum,intensity, filter, diffuser) to prevent accidental changes to these settings.Locks on individual memories may be turned ON and OFF without theneed to enter a code.• Level 2 & 3 - Locks functions per memory similar to lock level 1, exceptonce lock is turned ON for a particular memory, it may not be turnedOFF again without entering the lock code. Also locks the parameters onthe set up menu so they cannot be changed without entering the lockcode.• Level 4 - Locks all functions. A code is required to change any operatingparameters.Note: You must ensure the lock level is set to 0 before continuing withthe Integrator Program Set Up Features and the exposure memoryoptions detailed below in Lock Level Description and Operation.When programming is completed return to Lock Level Featureand set the desired lock level.• Press the P key on the integrator to power up the light, the front remoteswitches, and the exposure unit's computer system.[SEL_] Press 1,2,3t4 in sequence. The Vacuum window will read[SEL_]. This places you in the select mode.[LocK] Press the Y key once, the Exposure window will read [LocK].• Press the V key once.• If the Lock Level is set at 0 or 1 the Memory and Exposure windows will |
Related manuals for Accuprint AP42CL 8000
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved