Menu
Accuprint AP42CL 8000 Service Manual
                                                                                                                                      | |
Contents
| 
4-2 94MS42 Rev. B1 S/W Ver. 2.06dim. Enter the lock level desired.• Press the V key to set entry.• If the Lock Level is set for 2, 3 or 4, the Exposure window will read[codE]. Enter your 3 digit code.• Press the V key.• Press the 0 key.• Press the V key.Note: If you want a higher Lock Level after you have completed theIntegrator Program Set Up and/or made any changes return toLock Level Feature and set the lock level described in Lock LevelDescription and Operation.Lock Level Description and Operation[0000] Lock Level 0The Vacuum window will read [0000].[0001] Lock Level 1The Vacuum window will read [0001]. Locks functions for seconds, enter,vacuum and intensity per memory. Once this mode is turned ON and theset up programing has been completed, enter all needed information intoa memory location. Then press the U key, the Memory window willread [Ac] and the Exposure window will read [LocK]. Press the V key toturn the lock for this memory ON or OFF, then press the U key. Whenthe lock is turned ON, a decimal point will be displayed after each digitin the Memory window.[0002] Lock Level 2, 3The Vacuum window will read [0002] or [0003]. Locks functions forseconds, enter, vacuum and intensity per memory and Integrator ProgramSet Up Features. Before this mode is turned ON, enter all neededinformation into a memory location. Then press the U key, the Memorywindow will read [Ac], the Vacuum window will read [_oFF] and theExposure window will read [LocK]. Press the V key to turn the lock ONor OFF for this memory. When the lock is turned ON a decimal pointwill be displayed after each digit in the Memory window. Once this levelis turned ON you will not be able to unlock the features described abovewithout the Lock Code. See Setting or Changing your Lock Code Feature.[0004] Lock Level 4The Vacuum window will read [0004]. This locks all functions. Whenthe lock is turned ON, a decimal point will be displayed after each digitin the Memory window. Once this level is turned ON and the set upprograming has been completed, before you can change any programedfeatures or the exposure statistics you must use the Lock Code to set theLock Level back to 0, see Setting or Changing your Lock Code Feature. |
Related manuals for Accuprint AP42CL 8000
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved