46mV Setup: Set Data Storage CriteriaXL15, 20, 25, 50 and 60 metersThis screen allows you to select which criteria are stored in the data logger with the measurementwhen you store the data. The status of the current data storage criteria is displayed on thescreen. The criteria option is active if ON appears to the right of the option. It is inactive if OFFappears to the right of the option. Any active criteria will be stored on demand.To set Data Storage Criteria1. Touch the Touch here to edit button next to the Data Storage Criteria to access the pHData Storage Setup screen.2. Touch ON or OFF to change the status of a criteria you want to modify.3. Repeat step 2 for all the remaining criteria except Data logging Interval (or Data storageInterval).4. For Data logging Interval (or Data storage Interval), touch MANUAL to log mV data onlywhen the Log Data button is pushed, touch STABLE to automatically log mV data whenmV reading is stable, or touch TIMED to set a specific timed interval in seconds to log mVdata.5. Touch the OK button to accept the changes of the entire group of data storage criteria andreturn to the mV Setup screen.
