Device menu46MaintenanceNoteThis menu is used for device maintenance, andshould only be operated by experienced users.Menu Setting PageUpgrade Carries out a firmware upgradeLog Search A search of recordings or in-formation (S.M.A.R.T. HDDstatus) can be made in the logfile according to certain criteria(alarms, exceptions, operationor information).47Default System reset 48Menu Setting PageConfiguration Used to export or import thesettings48Information Device information (serialnumber, firmware status etc.)48Upgrading the deviceNoteA device upgrade can be made from a USB de-vice or over the network via FTP.• Copy the upgrade file to the main directory of aUSB stick.• Connect the USB stick to a USB port on thedevice.1. Select the USB port (click on “Refresh”, if neces-sary).2. Select the upgrade file and click on “Upgrade”.3. Wait until the device reboots.4. Check the firmware status in the “Maintenance”menu under “Information”.Note• Upgrades via FTP are made in the same wayas detailed above. The PC must be located inthe same local network.• Set up a PC as an FTP server.• Enter the IP address of the FTP server.