PTZ control31Pattern SettingsPatterns are defined tours from position to position thatare accessed in sequence on the PTZ camera. Patternsare recorded live. The system saves the parametersused whilst you move and adjust the cameras in se-quence to the corresponding positions at a definedspeed.• Select the camera in the control panel, then click on“Pattern Settings” in the pop-up menu:1. Select the pattern number.2. Click on “Run Record” to start the pattern recording.3. Using the control panel, adjust the camera positionand settings that you wish to record as a pattern.4. The recording is made until “Stop Record” is clicked.Note• Start the recorded pattern by calling up thepop-up menu (right-click in the live view of thePTZ camera).• Click on “Run Pattern” and click on the desiredpattern. The PTZ camera now starts moving tothe individual positions. After running throughthe entire pattern, the process is started again.
