Manual Management149Manual ManagementPress the REC button or go to panic recording in themain menu in order to start a manual image / video re-cording or to switch to an alarm output.RecordSelect the camera to start manual recording by click-ing the corresponding button.NoteClick “Analog” to record all connected cameras.Continous CaptureSelect the camera to manually record continuous instantimages. You can set the time interval in which these arerecorded in the recording menu (see p. 135).Click the control button for this.AlarmIn order to switch on one of the alarm outputs, select thealarm output with a left click and click on Trigger for one,or Trigger All, to switch on all outputs. To reset the out-put(s) again, click on Clear or Clear all.ShutdownNote Select “Lock” to lock the operating menu. Select “ShutDown” to switch off the device. Select “Reboot” to reboot the system (switchoff and back on).