Abus TVVR45030 User Manual

Also see for TVVR35011: User guide User manual

Abus TVVR45030 User Manual Manual pdf 56 page image

Settings - Configuration135RecordSetting upOpen the main menu and click on record:ScheduleThe schedule is used to specify the recording times andtriggers (recording type) for the cameras. Click on the“Schedule” tab:NoteBecause there is no difference between the set-tings for the TABs record and instant image, theseare only listed once.In the OSD, the hours of the respective days are listedfrom left to right (the days are listed from top to bottom).A colour key is shown underneath the days (i.e. the re-cording periods in the schedule are shown in colour ac-cording to the trigger (recording types)).Colour symbol KeyBlue Normal recording: Period in hoursYellow Motion detectionLight blue Motion detection and alarmRed AlarmGrey No selectionBrown Motion or alarm Select the camera and click on the check box En-able Schedule. Click on Edit to specify the type and duration of thetime plan1. Define the day to be set in the pull-down menu at‘Schedule’.2. Activate/deactivate ‘All day’. If the full day is active, nodefinite times can be entered as the setting is nowvalid for the whole day.3. To make specific time settings, deactivate the “AllDay” box.4. Specify the recording type in the drop-down menu: Time Motion detection Alarm Motion detection or alarm Motion detection and alarm5. When making a specific time setting, you can defineup to 8 time periods (each from 00:00 to 24:00). Thetimes in the individual periods must not overlap.NoteThe “Time” recording type defines the time win-dow where a recording is made.The other events (e.g. motion detection and/oralarm) only trigger the recording after the specificevent has occurred.Application exampleRecording should run from 11:00 to 07:00. 2 timezones must be set up for this:1. 11:00 AM - 24:00PM2. 00:00 AM - 7:00 AMNoteTo record using motion detection or the alarm, youmust first set this up in the Camera menu (see p.Fehler! Textmarke nicht definiert. “Setting up ofzones”) or Configuration (see p. Fehler!Textmarke nicht definiert.“Alarm”).