Abus TVVR40000 User Manual

Abus TVVR40000 User Manual Manual pdf 40 page image

Device menu40Setting up of zonesNoteWhen carrying out camera surveillance, you candefine zones that should not be monitored (privatezones).You can also set up zones with special character-istics (e.g. tamper monitoring or motion detection).1. Activate the zone by ticking the corresponding boxand clicking on “Area Settings”.2. With the left mouse button held down, pull a framearound the desired zone in the live screen.3. When setting tamper monitoring and motion detec-tion zones, you can open a pop-up menu by right-clicking the mouse. The sensitivity can be set hereand the full-screen mode can be activated (for mo-tion detection).4. To exit the zone settings, right-click the mouse andselect Exit.NoteAfter applying the settings, the set private zone isdisplayed as a black rectangle in the image.Zones for tamper monitoring and motion detectionare not displayed.Zones: Schedule and notificationNoteYou can assign the surveillance parameters indi-vidually and control the notification type for tampermonitoring, motion detection and video loss detec-tion.Schedule1. Select Schedule in the advanced camera settings.2. Select the day and enter the schedule.NoteYou can define up to 8 time periods (each from00:00 to 00:00). The times in the individual peri-ods must not overlap.3. Select whether the settings should be applied to alldays of the week using Copy To and confirm withCopy.4. Exit the settings by pressing OK.Notification1. Select Handle in the advanced camera settings.2. Enter the notification type:Parameter NotificationPop-up Image on Moni-torMessage appears on moni-torAudio Warning The device emits a repeat-ing toneNotify Surveillance Cen-treSee page 50Send Email An e-mail is sent to a spe-cific e-mail address (seepage 50)Trigger Alarm Output See page 533. Click on Apply to accept the settings.4. Click on OK to exit the menu.