Abus TVIP21502 User Manual

Also see for TVIP21502: User manual

Contents

Abus TVIP21502 User Manual Manual pdf 112 page image

112ActionThe following actions can be defined within an event action. Not all actions are available with all triggers. Foran activation, it is necessary to check the box of the action, but it is also possible that other boxes need to bechecked for further configuration of the action.Send image(s): Select the required event server that has already been configured.Send notification: This action sends a notification to an HTTP server. The option HTTP serverneeds to be configured beforehand.Activate switching output: Select the switching output. The switching behavior also needs to beconfigured:Constantly active during event triggering: While the trigger is triggered (such asthrough an extended period of motion detection), the switching output remainsactivated.Constantly active for: The switching output can be activated for 1–999 seconds.Night mode: Night mode of the camera is activated. The switching behavior also needs tobe configured:Constantly active during event triggering: While the trigger is triggered (such asthrough an extended period of motion detection), night mode remainsactivated.Constantly active for: Night mode can be activated for 1–999 seconds.ScheduleAlways: The event action is always executed without a time-based restriction.Schedule: Here a schedule that has already been configured can be selected for the event action.Schedules are configured under the “Event / Schedule” item.6.6.3 Continuous RecordingScheduled recording can be used only for recordings of video files.Name: Name of the configured eventActive: Shows whether the event is enabled.Action: Information about the action that follows after the event is triggeredNS: Network storage (network drive)LS: Local storage (SD card)Schedule: Schedule of the event actionGeneralName: Enter a name for the scheduled recording here.