703. InstallationMake sure that all accessories and parts listed above are present in the scope of delivery. An Ethernet cableis required for camera operation. This Ethernet cable must meet UTP Category 5 (CAT 5) specifications andmust not be longer than 100 metres.3.1 Power supplyBefore starting installation, ensure that the mains voltage and the rated voltage on the power supply unit areidentical. The camera’s supply voltage is 12 VDC. Please use the supplied power supply3.2 Installing the cameraWith the camera a mounting bracket is supplied. At the backside of the camera a socket is located. Using thissocket the camera mounting bracket can be fixed at the camera. The mounting bracket can be fixed at thewall unsing the supplied pegs and screws.4. Camera description4.1 Description of connectorsPowerconnectorResetEthernetconnectorAlarm input/outputWLAN Antenna(TVIP21552)LensIntegratedmicrophoneMicroSD cardWPSbutton Power LED Network LED
