Abus TVIP21502 User Manual

Also see for TVIP21502: User manual

Contents

Abus TVIP21502 User Manual Manual pdf 111 page image

111Motion detectionTime between two event triggers: Time definition in seconds (up to 999 seconds) before a possiblenext event is registered by the camera.Detection range: Selection of a previously configured motion range (configuration using the “Motiondetection” item).Detection type: Selection of the detection time pointStart: At the beginning of the eventStop: At the end of the eventSwitching inputTime between two event triggers: Time definition in seconds (up to 999 seconds) before a possiblenext event is registered by the camera.Switching input 1: Click here to activate the switching input as the trigger. The following switchingthresholds are available:Active: Upon increasing edge of the switching inputInactive: Upon declining edge of the switching inputInterval processTriggering every xx hours xx min.: The shortest triggering interval is 1 min. The longest triggeringinterval is 23 hours and 59 min.Upon restartThe event is executed upon restart of the camera.ICR filterTime between two event triggers: Time definition in seconds (up to 999 seconds) before a possiblenext event is registered by the camera.ICR filter mode: The event can be triggered by switching into day or night mode.Storage space warningThe storage space monitoring of the SD card is used as the trigger.Network connection inactiveLoss of the network connection is used as the trigger. The action is executed upon reestablishment of thenetwork connection.IP notificationChange of the IP address is used to trigger the change. Check the option that is to be monitored (DHCP,FixedIP, PPPoE)