Abaxis VetScan vs2 Operator's Manual

Also see for VetScan vs2: Operator's manual

Contents

Abaxis VetScan vs2 Operator's Manual Manual pdf 8 page image

1-2 Quick Reference Guide1.2 Installation GuidelinesStep 1: Unpack the VetScan VS2 Analyzer andAccessories1. Immediately upon receipt, place the box of reagentrotors in a refrigerator (2–8 ºC or 36–46 ºF).2. Remove the analyzer from its box and place it on a sta-ble, level surface.3. Complete and mail the warranty card within 10 days ofinstalling the system.Note: This Operator’s Manual is the most complete refer-ence for the analyzer. Always refer to this manual.Keep this manual in a convenient location for easyaccess, and store all product and manual updatesin it.Step 2: Set Up Electrical Connections1. Attach the AC power cord (with electricalwall plug) to the analyzer’s power adapter(see the figure).2. Attach the DC power cord to the back ofthe analyzer.3. Plug the AC power cord into a groundedelectrical outlet.4. Make sure all connections are secure.Note: To prevent power surges or drain, do not plug the analyzer into the same circuit asa centrifuge or any other high-current device. If this is not possible, use an ancil-lary surge protector or battery backup for the analyzer.