Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/ENReferences 05/2008 Page 3-13 REFERENCES3.1 TrainingAn overview of the sets in the M7xx and i7xx ranges is given during classical or IP environmenttelephony training sessions.Please refer to the catalogue for the training programs available.3.2 European approvalsThe sets are compliant with the main European requirements regarding EMC and safetystandards.3.3 Set identificationA unique software serial number is registered in the internal memory of each set.In addition, the i7xx sets store a unique MAC address.3.3.1 Set labelsA label, located on the underside of the sets, contains the certificate for several countries (samechannel). This complies with the prevailing standards in Europe. It contains the followinginformation:• Manufacturer name• Conformity marking: EC• Year of manufacture• The indication "Made in France"• Product description and colour: M7xx for digital sets or i7xx for IP sets, followed by Anthraciteblue or Glacier white (in full + barcode)• Product code with technical index (in full + barcode)• Gencode (in full + barcode)On i7xx sets, an additional label specifies the set's MAC address in full or barcode.3.3.2 Package labelsThe package label contains the following information:• Manufacturer name• Conformity marking: EC + recycling logo + fragile logo• Product description and colour: M7xx for digital sets or i7xx for IP sets, followed by Anthraciteblue or Glacier white (in full + barcode)• Product code with technical index (in full + barcode)• Date of manufacture: year/week (in full + barcode)• The indication "Made in France"• The quantity per package: 1
